24 VOLT TO 12 VOLT SPLIT CHARGER

24 volt dc to 12 volt dc 20 amp split charger. Designed to charge and maintain a 12 volt battery from a 24 volt dc system. It has a three stage micro processor controlled charging system and uses voltage sensing for automatic cut in and drop out of charge from the 24 volt system, so will not charge the 12 volt battery until the 24 volt batteries are charged or being charged.

Additional information:

• Red led main charge (constant current)
• Flashing red final charge (constant voltage)
• Green led float charge
• No led input below 25. 2 volt, split charger off

Specification

• Type 24 volt dc to 12 volt dc 20 amp split charger
• Voltage input 25 - 30 volt dc (switch on 27. 5 volt, switch off 25. 2volt)
• Maximum o/p current 20 amp
• Battery size recommended minimum 80ah
• Protection short circuit, reverse polarity, auto shut down if charge time from main to float exceeds 18 hours
• Material body coated steel, heatsink aluminium
• Cable length 1. 9m

Dimensions:

• Length 173mm
• Width 120mm
• Height 150mm
• Weight 1. 5kg

Approvals:

• Ce

Downloads:

• Pdf spec sheet Here